YC-110 Total power: 56kw Extrusion motor: 37 kW Gearbox: #200 Inverter: 37Kw Average power consumption: 200-250 kWh/tonne Cutter Motor: 0.75 Kw Fan motor: 0.75 Kw *2 and 1.5Kw*3 Screw diameter: Ø 110 mm Production capacity: 130kg/hour (depending on material) Here’s an article about the 110 model air-cooled plastic pelletizer, written for a Syrian customer:…
Read article
The Air Plastic Recycler is used to recycle waste plastic materials. It is equipped with automatic thermostat and motorized filter change. It can also make pellets from the crushed material. Equipped with loading device, the cutter adopts speed-regulating motor, which can cut according to the feeding speed of the extruder. With high output, low noise,…
Read article
Plastic air-cooled pelletizer: 1. Environmentally friendly pelletizing design, strong air-cooling system, no need for water cooling, no smoke and no smell, no pollution during recycling and pelletizing.2. Low temperature pelletizing technology, does not change the nature of the recycled material, produces high quality pellets, which can be mixed with the original pellets at a high…
Read article
The machines are designed by suing the “toy bricks” principle, the screw configuration, barrel setup, L/D or mode of feeding and venting, screen changing, way of granulating, and the control mode can beoptimally adjusted according to different materials properties and requirements in consideration of the versatility in each general applications.An improved design of the cutter…
Read article
The equipment takes HDPE, LDPE，po.pe waste film as raw material, extruded by extruder, air-cooled and hot-cut, and made into pellets, which are of good quality, bubble-free and moisture-free. The equipment is equipped with forced feeding device, quick screen changing device and automatic temperature control device. Features: 1.) The recycled material produced is free of air…
Read article
Air-cooled hot cutting plastic film recycling machine The machine Taking HDPE and LDPE waste film as raw material, it is extruded by extruder and then made into pellet by air-cooled hot-cutting, the pellet is of good quality, no bubble and no moisture. The machine is equipped with forced feeding, quick screen changer and automatic temperature…
Read article
Smokeless and waterless air-cooled recycling granulator for plastic film or biodegradable film, clean water film, 100% recycling, 100% mixing of original granules, air-cooled, hot cutting, no water cooling, hourly output of about 30-40kg/hour, the machine is called smokeless and waterless air-cooled recycling granulator, specializing in recycling of clean waste plastic film or biodegradable film into…
Read article
Biodegradable/plastic film air-cooled recycling granulator, suitable for plastic film or biodegradable film, clear water film, 100% recycling, 100% mixing with original granules, air-cooled, hot-cutting, no water-cooling, hourly output is about 40-60kg/h. This biodegradable/plastic film air-cooled recycling granulator is widely used for recycling PE or biodegradable plastic film, single screw, low temperature conditions, hot-cutting into The…
Read article
The machine is called air-cooled hot cutting PE PP plastic film granulator, specially used to recycle PE PP plastic waste film into recyclable plastic pellet granules, usually mixed with the original granules for making film again, in the air-cooled hot cutting PE PP plastic film granulator, using air-cooling, double-stage air-cooling, can effectively cool the granules,…
Read article
Honored! Welcome to visit the only factory in China that specializes in manufacturing plastic air-cooled granulators. Here, you will experience the revolutionary pelletizing technology that overturns the tradition and leads the industry to the future. We are committed to showing you a modern factory that truly realizes **”no smoke, no water, no smell ”** production,…
Read article